- When you use the motor, there shall be no binding. For example, the adhesives can't be allowed to flow into the bearings through the axis of rotation, which will hurt the motor operation.
- The axis of rotation of the motor may have the opposite effect on the motor lifespan. In order to increase the motor work time, please check whether the loaded items is at the range of motor power, not over-oaded.
- The heavy radiation or eccentric load is harmful to the life of motor.
- Do not store the motor in high temperature or extreme wet environment, also do not placed in the corrosive gas, which will lower the effect of the motor.
- The motor do not work in high temperature and damp surroundings.
- Do not let the motor shaft gets stuck when having power input, which can make the motor overheating, burning its accessories in a short time.
- Due to a lack of professional technology, it is easily to make the motor get broken so please operate the motor within the datasheet and engineer's instrutions.
- The power supply must be within the measurable requirements.
- When installing the pulley or gear, don't overstress.
The Explanations for Motor Parameters:
- The no-load speed: the speed of the motor normal electricity without load condition.(unit: RPM or r/min)
- The no-load current of motor is normal electricity without load state of the current.(unit: mA)
- The load torque of motor rated torque load testing time, only for test reference.(unit: g-cm r KGCM)
- Load speed: the speed of the motor under load torque.(unit: RPM or r/min)
- Load current of motor under load torque current.(unit: mAor A Ann)
- Locked-rotor torque: also called start torque, can withstand the maximum torque standard by motor, more than the torque, the motor will halt or blocked.(unit: g-cm or kg-cm)
- Locked-rotor current: also called starting current, have been blocked for the generator to stop when the maximum current.(unit: mA or Amps)
