This is unipolar nema 16 stepper motor with size 39x39x38mm. It has 4 wires, each phase draws 0.8A with holding torque 0.18Nm(25.5oz.in).
Electrical Specification
Part Number: 39HS38-0806S
Step Angle: 1.8deg
Bi/Unipolar: Unipolar
Holding Torque: 0.18Nm(25.5oz.in)
Rated Current/phase: 0.8A
Phase Resistance: 7.5ohms
Inductance: 6.0mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 39x39mm
Body Length: 38mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 6
Lead Length: 300mm
Weight: 200g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.18 |
| Holding Torque(oz.in) | 25.5 |
| Rated Current(A) | 0.8 |
| Phase Resistance(ohm) | 7.5 |
| Phase Inductance(mH) | 6 |
| Physical Specification | |
| Frame Size(mm) | 39x39 |
| Body Length(mm) | 38 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 6 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.18 |
