LEADSHINE M860C Digital Stepper Drive 30-80VDC 2.4-7.2A
Key Features:
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- 16 selectable microstep resolutions: 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
- Soft-start with no "jump" when powered on
- Input voltage 30-80VDC
- 8 selectable peak current: 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
- Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, over-current protections
Electrical Specifications:
- Output Peak Current: 2.4-7.2A (6.0RMS)
- Input Voltage: +20-80VDC
- Logic Signal Current: 7-16mA (Typical 10mA)
- Pulse Input Frequency: 0-200kHz
- Isolation Resistance: 500MΩ
Operating Environment and other Specifications:
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0-65℃
- Humidity: 40%-90%RH
- Operating Temperature: -10℃-45℃
- Storage Temperature: -20-65℃
- Weight: 430g
Contact Us
| Drive Specification | |
| Input Voltage(VDC) | 36-80 |
| Output Current(A) | 2.4-7.2 |
| Micro-step Resolutions | 400-51200 |
| Matched Size | NEMA23-NEMA34 |
| Weight(G) | 430 |
